Description
An eight piece set of double cut tungsten carbide burrs in a range of shapes.
Extremely hard wearing and suitable for work with metals, plastic and wood.
Our Tungsten Carbide Burr's are made from pure raw material which means they can be hardened to HRA 89-91.
The sintering process is performed in a pressure furnace to keep volatilisation to a minimum and ensure the highest hardness is achieved.
Manufacturers that use scrap material and a vacuum sintering process cannot reach the same level of hardness.
A silver braze is used rather than a copper braze favoured by other manufacturers as it can be applied at a lower temperature that will not affect the concentricity and hardness of the burr and shank.
Shank size: 6mm diameter
Shank length: 45mm
Material: YG8 Tungsten Carbide
Hardness: HRA 89-91
Contents (Sizes are cut diameter x cut length):
Type B - Cylinder end cut 12 x 25mm
Type B - Cylinder end cut 10 x 20mm
Type C - Cylinder (ball nose) 10 x 20mm
Type C - Cylinder (ball nose) 6 x 16mm
Type D - Ball shape 12 x 10mm
Type D - Ball shape 10 x 8mm
Type F - Tree with radius End 12 x 25mm
Type F - Tree with radius End 10 x 20mm